SMT Taping：
QMT-1100D
The QMT-1100 D offers…
Sealing mechanisms provide a quiet, smooth operation
Choice of sealing styles heat or pressure (PSA)
No dedicated tooling provides quick, easy changeovers
Fully adjustable, accommodates 8 -72 mm wide carrier tapes
Large stainless steel work area
Smooth work surface provides easy part placement into carrier tapes
Micro-adjustable sealing allows for accurate seal location
Preset counter/stop
Variable tape speeds are operator selectable
13″ or 22″ reels
Above all, quality and versatility
QMT-1100M
The QMT-1100 M Tape and Reel machine offers…
Optional large stainless steel work surfaces allows this unit to be easily used as a manual workstation
Integratable to a variety of vision systems
Quick easy changeover without dedicated tooling
Fully adjustable, accommodating 8-72 mm wide carrier tapes seals with heat activated or pressure sensitive cover tapes
Micro adjustable sealers provide accurate seal locations
Programmable leader and trailer lengths
Simple menu set-up
Adjustable motor speed and for fast and smooth operation
Empty pocket detection – Audible alarm sounds halts operation
Optics swing away for easy empty pocket fill
Carrier tape supply arm can be positioned on left or right side of machine (must be specified at time of order)
QMT-1250
No dedicated tooling provides quick, easy changeovers
Fully Adjustable from 8 mm to 152 mm Carrier Tape
Micro-Adjustable sealers allow for simple, accurate seal locations
Sealing mechanisms provide a quiet smooth operation
Programmable parts counter for exact reel counts
Equipped with optics for empty pocket verification
Capable of using both heat activated or pressure sensitive cover tape
Large work area, for comfort of operator
Ample room for more than one operator
Smooth work surface to provide ease of placement into carrier pockets
QMT-1500
The QMT-1500 – Automatic Taping System offers…
Manual unit easily upgrades to stack tube feed or vibratory bowl feeder
Accepts all surface mount tape sizes, from 8 to 56mm – tape changes take two minutes or less
No tooling changes between tape sizes
Independently controlled heat and shoe pressure
Large 520 sq. in. work area
23 inches of exposed pockets
Programmable leader and tail lengths
ESD Safe
Virtually maintenance free
Continuous or foot feed operation
Simple menu set-up
Program to count parts or empty pockets
Empty pocket detection alarm sounds, machine stops, and optics swing away for easy empty pocket fill
Adjustable motor speed and acceleration, for smooth operation and no jostling of parts
QMT Dual Track
The QMT Dual Track Taping System offers…
Allows for continuous operation with no downtime
25% increase in throughput of taped components
Operator can run 2 different size components at the same time
Part Kitting capabilities
Accommodates up to 56mm carrier tape; 72mm carrier optional
Seals both heat and PSA cover tape
Micro adjustable sealers provide accurate seal location
Empty pocket detection – audible alarm sounds, halting operation
Programmable leader and trailer lengths
Custom hardware and software variations are optional
Mass Lead Trimming Equipment:
Vector
The Vector Lead Trimming System has a high trim accuracy, allows for a large PCB trim area, and is simply the most operator friendly setup of any mass lead trimmer available. It is the combination a precision and value without compromise.
This Vector trimming system has been designed with some of the finest engineering and craftsmanship available on the market today.
The Vector was built in our factory with the highest regard to quality. Each part utilized in construction of this machine has been carefully inspected to ensure proper fit, alignment and performance. Every function of this machine’s operation has been certified by our technical staff to assure trouble free operation and compliance to all specifications quoted by Q Corporation.
The Vector Lead trimmer offers…
Vector AC drive for low maintenance with dynamic braking
Variable speed selection with current feedback control for consistent operation
Built-in Universal Mechanical Fixturing adjustable to 15 in. x 18 in. (38.1cm x 45.7cm)
Built-in Universal Vacuum Fixturing, with magnetic standoffs for corner to corner tolerances
within .002″
Height cutter adjustment which is easily managed by the operator
Precision ball bearing surfaces at all critical wear points on drive and X-Y carrier to maintain tolerances on trim platform
Operator safety assured, with two button activation to start cutter drive
Q “Super Cutter Ring” for safe performance and durability
Parts Counting And Peel Force Testing:
QC-100
An Economical pocket counter designed for any style of surface mount carrier
The QC-100 is an economical pocket counter designed for any style of surface mount carrier. It accommodates all types of SMD carrier tapes; embossed, punched clear or opaque.
This competitively priced counter is portable, yet provides a large generous work area allowing for potential rework of tape without the removal of the reel.
Setup is quick and easy with our operator friendly pocket pitch guide; total count displays up to 6 digits in large easy to read numbers.
The QC-100 offers…
Accepts reel widths from 8mm to 72mm
Accommodates part pitch from 2 to 72mm
7″ and 13″ reel diameters standard (optional 22″ on order)
Count rate up to 1000 parts per second
Accurately counts forward or reverse directions
Generous work area for rework or inspection
Easy access to cut tape for kitting
Easy to read 6 digit readout
QPT-300
Provides accurate peel force readings to insure compliance with EIA specifications. Our SPC software allows for documentation of each sample for your records.
Accurate, Simple Determination of Cover Tape Peel Strength!
Testing of peel strength to EIA standards is simplified with the QPT-300. An integrated force gauge digitally displays readings utilizing multiple sampling methods including: Min/Max & Average or Continuous Update. By placing a sample in the machine, you can view the test results on the built-in instrument, an optional “strip chart recorder,” or use the RS232 serial port (standard) and output to a PC. The compact, modular design means this machine is delivered the way you want it!
Options…
Taped Reel Carrier* holds reeled carrier tape, and serves as a base for the machine
SPC Software for your personal computer
QPC
This true parts counter displays total parts counted and the number of empty pocket detected. The large work area allows for part inspection and rework without removal of the reel.
The QPC Parts Counter and Inspection Station incorporates a precision carrier tape sprocket coupled to a full quadature encoder for positive and snag free results. The missing part sensor is activated at the precise point of the expected filled pocket arrival. Should a part be missing, the “Missing Part” LED is illuminated and the “Empty Pocket Counter” records the event. Abundant work space facilitates rework of tape and continues counting, without removing the reels.
The QPC offers…
A true component counter with empty pocket detection
Quickly locates and alerts operator to empty pockets
Generous work area and comfortable for long runs
Operator friendly setup and operation
Accurate counts forward and reverse
Totally portable and ergonomically designed
Maintenance Services:
Cutter Rings
Resharpening Service
Q Resharpening Service Advantages:
Our computerized service provides precision consistent results.
Full time trimming experts are on call, as close as your phone.
Our clients always receive their own cutters, no mix ups.
Only Q Corporation manufactures genuine Q-Cutters.
A comprehensive audit is sent with each shipment detailing complete information on the service and cutter ring condition.
咨询更多信息，请随时联系我们！
电话：021-56680271
邮箱：sales@shqinuo.com
QQ：977183489
